Wikiprocedure

Arunachal Pradesh - Apply for Manufacturer License under Weights and Measure

Page Discussion

Advertisement

ProcedureEdit

No person shall manufacture any weight or measure unless he holds a valid licence issued by the Controller of Legal Metrology.
Apply In-Person:

  1. Applicant shall approach office of the Assistant Controller of Legal Metrology / controller of legal metrology / Inspectorate Offices under whose dominion the manufacturing unit is located.
  2. Link for contact details : link use the district hyperlink for contact information
  3. Go to the office.
  4. Obtain the application form or write on a A4 sheet as advised.
  5. Link for Application form
  6. After filling/completing application form attach all the required documents as per our required document section.
  7. Submit the document set along with required/applicable fee to the receiving authority.
  8. Submitted application will be verified by the authorities. If all are in place submitted application will be accepted.
  9. Applicant will be provided with receipt for submission of application.
  10. This application will be processed further by the department.
  11. Applicant gets intimation from the department about the application progress. Follow the notification.
  12. There will be inspection cum verification process from the department authorities on a scheduled date.
  13. The premises will be inspected by the concerned Legal Metrology Officer and documents in original will be verified and security deposit if applicable would be collected.
  14. This application along with inspection/verification report will be submitted to the issuing authority/controller of legal metrology concerned.
  15. Based on the advice and report the registration process will be completed,
  16. The status, viz. Approval or Rejection if any will be conveyed to the applicant through an SMS.
  17. If approved, the certificate will be issued as per applicable norms.


NOTE:
  • A proof of sanctioned and installed and energized power load required for proper manufacturing of the items shall also be furnished by the applicant.
  • The workshop premises should be suitable and adequate (not less than the area as prescribed)


Apply Online

  1. To apply online, visit the following portal.
  2. For availing any services under EoDB, the applicant has to first apply and obtain UBIN ( Unique Business Identification Number).
  3. To obtain UBIN, visit the following portal.
  4. Click on login and fill the required credentials.
  5. Click on the “Apply for Services” section from the side menu and select “View all available services”.
  6. Search “Arunachal Pradesh” and “Common Application Form” in the search boxes.
  7. Click on “Common Application Form” which appears after searching.
  8. Fill the form with asked information and click on “Submit”.
  9. Save the reference number which will appear on the screen.
  10. Now, click on “Attach Annexure” and submit the required documents for chosen enclosure.
  11. Click on “Save Annexure” and then on the “Submit” button.
  12. Print the form for future reference.
  13. The UBIN will be generated in 20 minutes on a working day.
  14. Now go to the portal provided in the first line and click on “Services” from the top menu.
  15. Go to “Services”> Then Click on “Legal Metrology” >Click on “Apply” against the service for “Apply for Fresh License as Dealers”.
  16. Log in with correct Login ID, Password and Captcha.
  17. After login, go to “Apply for Services”> View Services>Choose “Arunachal Pradesh”> Type “Legal Metrology” in Search Box> Click on “Apply For License as Dealers”
  18. Put the UBIN number and PAN number and click on “Get Details”.
  19. Fill other required details in the, put the captcha correctly as shown in the image and click on the “Submit” button.
  20. After Submitting the form click on “Attach Annexure” and select the enclosure documents from the dropdown menu and select the required file by clicking “Choose file” or by “Scan” the document. After that click on “Save annexure”
  21. Keep the Application Acknowledgement for future reference.
  22. After getting the approval confirmation through SMS and email, log in again and View Status of Application> Track application Status> and click on “Make Payment”.
  23. After payment has been done successfully, the applicant will get a final approval SMS.
  24. The applicant can download the final certificate by login to the EoDB portal.



Advertisement

Required DocumentsEdit

  • Application form
  • Certificate of registration of Industry/registration under Shops and Establishments Act/NOC from Gram panchayat as appropriate
  • Authenticated document regarding Proprietorship /Registered partnership deed/memorandum of association and articles of association along with list of directors.
  • Premises - ownership documents/ registered rent or leave license agreement or lease agreement NOC from the owner / NOC of the member if the premise is owned by family member.
  • Model Approval certificate
  • Machinery, tools and equipment list
  • PAN card
  • Profession tax registration
  • List of qualified persons.
  • Educational qualification certificate of the Applicant / qualified person
  • Verification certificate of test weight or measure
  • Self-declaration about whether any offence is pending against him in court and/ or police station
  • Self-declaration about whether the Applicant has violated any of the provisions of Legal Metrology Act, 2009 or rules made there under.
  • Electricity load approved certificate
  • Latest electricity bill.
  • Experience certificate (2 years)
  • Receipt of property tax
  • Aadhaar card of directors
  • Bank’s Statement
  • Copy of Test Reports


Note:
Self-attested copy of the applicable documents should be attached
Apart from the above listed documents, authorities may ask for additional information or document. Please provide them for smooth processing.


Office Locations & ContactsEdit

DEPARTMENT OF LEGAL METROLOGY & CONSUMER AFFAIRS
C-Sector, Naharlagun, Arunachal Pradesh-791110
Phone: 0360-2248620
E-mail: [email protected]
Contact link

EligibilityEdit

  • Applicant should be the citizen of India
  • Age limit 18 years and above
  • An individual or a company registered under government act is eligible to apply.
  • Having 2 years of experience or having required education.
  • Proof of financial status
  • Sanctioned power load


FeesEdit

  • Fee details shall be obtained while applying. There are category based fee structures, which applicant need to pay while applying.


ValidityEdit

  • Every licence issued to a manufacturer shall be valid for a minimum period of one calendar year and can be renewed.


Documents to UseEdit


Sample DocumentsEdit

Please attach sample completed documents which would help other people who would like to follow this procedure.


Processing TimeEdit

  • 30 working days.


Related VideosEdit

Videos explaining the procedure or to fill the applications.
Attach videos using the following tag <&video type="website">video ID|width|height<&/video&> from external 
websites.
Please remove the "&" inside the tags during implementation.
Website = allocine, blip, dailymotion, facebook, gametrailers, googlevideo, html5, metacafe,
myspace, revver,
sevenload, viddler, vimeo, youku, youtube
width = 560, height = 340, Video ID = Can be obtained from the URL of webpage where the video is displayed.
e.g In the following url "http://www.youtube.com/watch?v=Y0US7oR_t3M%22 Video ID is "Y0US7oR_t3M".


InstructionsEdit

  • Don’t forget to take all the originals of the document along with copy for applying.
  • Better inform a chartered accountant and take his assistance.
  • Ensure that application is complete before submission.


Required InformationEdit

  • Name of the applicant
  • Address of the applicant
  • Father's Name
  • email ID
  • Mobile number


Need for the DocumentEdit

  • The Department issues licence to manufacture weights &measures for dealing in weighing & measuring instruments.
  • Manufacturing weights and measure without this license is punishable. So, one has to follow the steps as explained in this procedure to obtain one.



Information which might helpEdit

  • A licence issued or renewed under this Act shall not be saleable or transferable.


Other uses of the Document/CertificateEdit

Please explain what are other uses of obtaining this document/certificate.
e.g. Birth Certificate can be used as proof of identity.


External LinksEdit

Place some external links which might help.


OthersEdit

More information which might help people.


Retrieved from "https://www.wikiprocedure.com/index.php?title=Arunachal_Pradesh_-_Apply_for_Manufacturer_License_under_Weights_and_Measure&oldid=4315"